Hey everyone! I’ve been diving deep into the world of eco-friendly renovations lately, especially focusing on natural paints. My latest project involves covering up some wall flaws in my living room, and I’m on the hunt for the best non-toxic paint sheens that can do the job without harming the planet. So far, I’ve experimented with Earthborn’s Claypaint in a matte finish, which is fantastic for its breathability and low VOC content. However, I’m curious about how different sheens might affect the coverage of imperfections like small cracks and uneven textures.
I’ve also tried Auro’s Plant-Based Paint in a satin finish on a smaller wall section, and it provided a nice balance between durability and aesthetic appeal. But I’m wondering if a higher sheen, like semi-gloss, would offer better coverage for more noticeable flaws. Has anyone else played around with different sheens in natural paints? How did they perform in terms of hiding wall imperfections and overall application ease?
I’m particularly interested in hearing about your experiences with specific brands and sheens. Did you find that certain finishes required more coats to achieve the desired coverage? Also, how did you find the environmental impact of these products in terms of their manufacturing process and ingredients? Let’s share our stories and tips to help each other make more informed, eco-conscious choices in our painting projects!
I’ve been using Earthborn’s Claypaint for a while now, and I must say, their matte finish is superb for covering up minor wall flaws. It’s not just the low VOC content that’s impressive, but also how it allows the walls to breathe, preventing mold and mildew. For more noticeable imperfections, I’ve found that applying a primer first can make a big difference in coverage.
3 Likes
@GreenThumb88 Thanks for the tip about the primer! I hadn’t considered that. Do you have any recommendations for eco-friendly primers that pair well with Earthborn’s Claypaint?
1 Like
I experimented with Auro’s Plant-Based Paint in a semi-gloss finish for my kitchen walls, which had quite a few imperfections. The higher sheen did a fantastic job at hiding those flaws, and it’s held up really well against moisture and stains. However, it did require two coats for full coverage, so keep that in mind if you’re considering a semi-gloss finish.
4 Likes
@NatureLover99 That’s really helpful to know! I was leaning towards trying a semi-gloss for the living room, and your experience with Auro’s Plant-Based Paint sounds promising. Did you notice any difference in the application ease between the satin and semi-gloss finishes?
2 Likes
I’ve had a great experience with Biofa’s Natural Paints. Their satin finish is not only eco-friendly but also incredibly durable. It covered up my wall’s imperfections beautifully with just one coat. Plus, the fact that it’s made from natural ingredients and has a minimal environmental impact is a huge bonus for me.
5 Likes
@DIYQueen I haven’t tried Biofa’s Natural Paints yet, but your experience sounds amazing! One coat coverage is definitely appealing. How did you find the drying time compared to other natural paints you’ve used?
1 Like
Just a quick note to say how much I appreciate this thread! I’m just starting my journey into eco-friendly paints, and all these insights are incredibly helpful. I’m definitely going to look into Earthborn’s Claypaint and Biofa’s Natural Paints for my next project.
2 Likes
I’ve been using Earthborn’s Claypaint for a while now, and I must say, their matte finish is superb for covering up minor wall flaws. It’s not just the low VOC content that’s impressive, but also how it allows the walls to breathe, preventing mold and mildew. For more noticeable imperfections, I’ve found that applying a primer first can make a big difference in coverage.
4 Likes
Totally agree on the primer tip. I’ve had good luck with Biofa’s Eco-Primer before applying any topcoat. It’s a bit pricier, but the coverage and adhesion are top-notch. Makes the paint job last longer too. Have you tried any other primers that work well with natural paints?
2 Likes
I’ve been experimenting with Ecos Paints lately, and their semi-gloss finish does wonders for hiding those pesky wall flaws. It’s a bit shinier than I usually go for, but the coverage is unbeatable. Plus, it’s super eco-friendly. Anyone else tried Ecos for their projects?
5 Likes
I’m all about that Auro’s Plant-Based Paint life. Their satin finish is my go-to for a balance between durability and aesthetics. I haven’t ventured into semi-gloss yet, but your experience with Ecos makes me curious. How does the semi-gloss hold up in high-traffic areas?
1 Like
Interesting to hear about the semi-gloss from Ecos. I’ve been sticking to matte finishes for the most part, worried about the shine highlighting imperfections instead of hiding them. But if it’s working for you, maybe I’ll give it a shot on a smaller wall first. Do you find it requires more coats than matte?
1 Like
I’ve been using Biofa’s Natural Paints too, and I’m really impressed with their satin finish. It’s not just about the coverage, which is top-notch, but also how it feels to apply. Smooth and easy, with no strong odors. It’s a game-changer for anyone looking to combine eco-friendliness with quality. Have you tried their other finishes? I’m curious about how they compare.
1 Like
I’m all about Earthborn’s Claypaint for its matte finish. It’s perfect for hiding those tiny imperfections without drawing attention to them. Plus, the breathability factor is a big win for older homes. I haven’t ventured into higher sheens yet, but your experience with Auro’s Plant-Based Paint in satin has me intrigued. Maybe it’s time to experiment a bit more.
4 Likes
I tried a semi-gloss from a different brand, thinking it would cover up more flaws, but it actually highlighted them. It was a bummer. That’s why I stick to matte and satin finishes now. They seem to do a better job at disguising imperfections. It’s interesting to hear about Biofa’s Natural Paints though. I might give them a shot for my next project. How do they fare in terms of drying time?
1 Like
I’ve been using Earthborn’s Claypaint for a while now, and I must say, it’s a game-changer for covering up wall flaws. The matte finish really helps in hiding those imperfections without needing multiple coats. It’s also great to know that it’s eco-friendly and has low VOCs. For anyone just starting out with eco-friendly paints, I’d highly recommend giving it a try. It’s a bit pricier than conventional paints, but the quality and environmental benefits are worth it.
3 Likes
I tried Auro’s Plant-Based Paint in a semi-gloss finish for my kitchen walls, and it worked wonders for covering up some old stains and marks. The higher sheen did a fantastic job of hiding flaws, and it’s held up really well against moisture and cleaning. It’s a bit more challenging to apply evenly compared to matte finishes, but with a bit of patience, the results are stunning. Plus, knowing it’s plant-based and non-toxic makes me feel good about using it in my home.
5 Likes