Hey fellow eco-warriors! 
I’ve been diving deep into the world of natural paints for my latest home renovation project, and I’ve got to say, it’s been quite the adventure. This time around, I’m focusing on giving my living room a bit of a metallic sheen without compromising on my eco-friendly principles. I’ve been experimenting with VOC-free metallic paints, specifically from the brand EcoShine Paints. Their silver and gold hues are absolutely stunning, and the fact that they’re free from volatile organic compounds makes me feel good about my choice.
However, I’m curious about their durability over time. I’ve previously used GreenGuard’s matte finish on my bedroom walls, which held up beautifully, but metallic paints are a whole new ball game for me. I’ve applied a test patch on a small section of my wall, and so far, so good, but I’m wondering how it’ll fare in high-traffic areas. Has anyone else tried VOC-free metallic paints on surfaces like doors or furniture that see a lot of use? How did they hold up against scratches and daily wear?
Also, I’m all ears for any tips on application techniques that might enhance durability. I used a natural bristle brush for my test patch, but I’m contemplating whether a foam roller might give a more even coat. Any thoughts or experiences you’d like to share? Let’s discuss and help each other make our homes both beautiful and sustainable! 
Hey @EcoPainter88, I’ve been using EcoShine Paints for a while now, and I must say, their durability is impressive. I painted my front door with their gold metallic paint about a year ago, and it still looks as vibrant as the day I applied it. The door gets a lot of direct sunlight and frequent use, but the paint has held up remarkably well against scratches and fading. I used a foam roller for application, which gave me a smooth, even coat. Highly recommend giving it a try!
3 Likes
I’m curious about the drying time for these VOC-free metallic paints. @GreenThumb99, did you notice any difference compared to traditional paints? Also, @EcoPainter88, how’s the coverage with EcoShine Paints? I’m considering switching but worried about needing multiple coats.
1 Like
Thanks for sharing your experience, @GreenThumb99! It’s reassuring to hear about the durability, especially on a high-traffic area like a front door. I’ll definitely consider using a foam roller for my project. @SunnyDays47, the coverage is quite good. I managed to get an even, opaque finish with just two coats on my test patch. As for drying time, it was slightly longer than traditional paints, but nothing too inconvenient.
2 Likes
Has anyone tried EcoShine Paints on furniture? I’m thinking of giving my old coffee table a new lease on life with a metallic finish, but I’m concerned about how it’ll handle spills and cleaning.
@NatureLover23, I haven’t used it on furniture myself, but a friend painted her dining table with EcoShine Paints and applied a natural, non-toxic sealant over it. It’s been holding up well against spills and cleaning. Maybe that’s something you could consider?
1 Like
I’m all for eco-friendly options, but I have to ask, how do these VOC-free metallic paints compare in terms of cost to traditional metallic paints? I’m on a tight budget but want to make sustainable choices.
@SkyWatcher56, I found that EcoShine Paints are slightly more expensive upfront compared to traditional options. However, considering their durability and the fact that I didn’t need as many coats, I think they offer good value in the long run. Plus, the peace of mind from using a non-toxic product is priceless!
4 Likes
Hey! I’ve been using EcoShine Paints for a while now, and I can say the drying time is pretty much on par with traditional paints, maybe just a tad longer. But honestly, it’s not something you’d notice unless you’re really timing it. As for coverage, I found that two coats usually do the trick for a solid, even finish. It’s all about the prep work though; make sure your surface is clean and primed if needed. Have you tried any of their other colors?
3 Likes
I switched to EcoShine Paints last year and haven’t looked back. The coverage is great, but I did notice that the metallic shades can be a bit trickier to apply evenly. A foam roller might help, but I’ve had the best results with a high-quality natural bristle brush. It gives you more control over the application, especially in corners and edges. Drying time hasn’t been an issue for me, but I always make sure to paint in a well-ventilated area to speed things up. How do you deal with the metallic finish showing brush strokes?
I actually used EcoShine Paints on a set of dining chairs last year. Went for the gold finish, and it turned out pretty stunning. As for durability, it’s held up surprisingly well. We’ve had a few spills, but a quick wipe with a damp cloth hasn’t caused any issues. Just make sure you give it enough time to cure fully before putting it to the test. I’d say go for it, especially if you’re looking to breathe new life into that coffee table.
2 Likes
I haven’t tried EcoShine on furniture, but I did use their silver paint on a metal lamp base. It’s been about six months, and it still looks great. No scratches or wear, even though it’s something we handle daily. For application, I found that a foam roller gave a smoother finish compared to a brush, especially on metal surfaces. Might be worth experimenting with both to see what works best for your table.
1 Like
I’ve been using EcoShine Paints for a while now, and honestly, the cost difference isn’t as bad as you’d think. Sure, they’re a bit pricier upfront compared to traditional metallic paints, but considering the health and environmental benefits, it’s worth it. Plus, they tend to last longer, so you save money in the long run. I painted my kitchen cabinets with their gold hue, and they still look fantastic after two years.
1 Like
I was skeptical about the cost too, but after doing the math, I realized it’s not just about the price per can. It’s about how much you actually use. VOC-free paints often have better coverage, so you might end up using less. I used EcoShine’s silver on my front door, and it took fewer coats than I expected. Definitely something to consider if you’re on a budget.
I hear you on the budget concerns. I found that mixing my own metallic finishes with mica powders and a clear VOC-free base can be more cost-effective. It’s a bit more work, but you can customize the sheen and color to exactly what you want. Plus, it’s a fun project if you’re into DIY. Just a thought if you’re looking to save some cash.
1 Like
Cost was a big factor for me too, but I found that buying in bulk during sales helped a lot. EcoShine and other eco-friendly brands often have promotions, especially around Earth Day. I stocked up then and saved a bundle. Also, consider the resale value of your home. Eco-friendly upgrades can be a selling point, so it’s an investment in a way.