Hey everyone! 
I’ve been diving deep into the world of eco-friendly renovations lately, and I’ve got to say, the journey has been both enlightening and a bit overwhelming. Recently, I decided to repaint my living room using Earthborn Claypaint, a brand I’ve come to trust for its minimal environmental impact and beautiful, matte finish. But here’s where I hit a snag—I wanted to use a sprayer for a smoother application, but I’m not sure which type works best with natural paints.
I’ve previously used Airless sprayers with conventional paints and loved the efficiency, but I’m curious if anyone has experience using them with eco-paints. Specifically, I’m wondering about the consistency—does it clog the sprayer? Also, has anyone tried HVLP (High Volume Low Pressure) sprayers with natural paints? I’ve heard they’re great for reducing overspray and waste, which aligns perfectly with my sustainability goals.
Lastly, I’m all about reducing my carbon footprint, so any tips on cleaning the sprayers without harsh chemicals would be greatly appreciated. Have you found a particular method or product that works well for you?
Looking forward to hearing your experiences and advice! Let’s make our homes beautiful and kind to the planet. 
Hey GreenThumbGary! 
I’ve had a pretty good experience using HVLP sprayers with Earthborn Claypaint. The key is to thin the paint slightly more than you would for conventional paints. This prevents clogging and ensures a smooth application. I found that adding about 10% water works well, but you might need to experiment based on your specific sprayer model. As for cleaning, I use a mixture of vinegar and water, which is effective and eco-friendly. Just make sure to clean the sprayer immediately after use to avoid any residue buildup. Hope this helps!
3 Likes
I’ve used both Airless and HVLP sprayers with various eco-paints, including Earthborn Claypaint. Honestly, I prefer HVLP for smaller projects because it gives me more control and significantly reduces overspray. However, for larger areas, an airless sprayer can be more efficient, provided you adjust the settings to accommodate the thicker consistency of natural paints. A tip for airless sprayers: use a larger tip size to prevent clogging. For cleaning, I second the vinegar and water solution—it’s a game-changer!
4 Likes
@EcoPainter123 Thanks for the tip about thinning the paint! I’ll definitely give that a try. Do you have any recommendations for a specific HVLP sprayer model that works well with eco-paints?
1 Like
@SprayGuru I agree, HVLP is fantastic for detail work. Have you noticed any difference in drying times between airless and HVLP applications with eco-paints? I’m curious if the method affects the finish quality.
2 Likes
Just chiming in to say I love the focus on eco-friendly cleaning solutions here! It’s so important to consider the entire process, not just the paint itself. I haven’t used a sprayer yet, but this thread is making me consider it for my next project. Thanks for all the great advice!
5 Likes
@GreenThumbGary I’ve had great results with the Fuji Semi-PRO 2. It’s a bit of an investment, but the quality and durability are worth it, especially if you’re planning more eco-friendly projects in the future. It handles Earthborn Claypaint beautifully when thinned correctly.
3 Likes
@EcoPainter123 I haven’t noticed a significant difference in drying times between the two methods, but the finish quality with HVLP is slightly better, especially for detailed work. The key is ensuring the paint is properly thinned and the sprayer is clean. It’s all about the prep work!
2 Likes
I’ve tried both airless and HVLP sprayers with eco-paints, and honestly, it’s a mixed bag. Airless sprayers are faster, but they can be a nightmare with clogging if the paint isn’t thinned just right. HVLP, on the other hand, is slower but gives you that fine finish without much hassle. Cleaning is easier too, just stick to eco-friendly cleaners like vinegar and water.
1 Like
That’s interesting about thinning the paint. I’ve always been hesitant to thin eco-paints, thinking it might affect the coverage or the eco-friendly properties. But if it works for you, maybe I’ll give it a try. Do you notice any difference in the paint’s performance after thinning?
2 Likes
I’ve been using a gravity feed HVLP sprayer with my eco-paints, and it’s been a game-changer. The key is to keep the paint well-stirred and maybe strain it before use to avoid any bits that could clog the nozzle. As for cleaning, I’ve found that a simple soap and water mix does the trick, and it’s gentle on the environment too.
3 Likes
Has anyone considered the environmental impact of the sprayers themselves? I mean, beyond the paint and cleaning solutions. I’m curious about the energy consumption of airless vs. HVLP sprayers and if there’s a significant difference. Also, how about the longevity and repairability of these tools? It seems like another angle to consider for those of us trying to minimize our footprint.
I’ve been using Earthborn Claypaint with an HVLP sprayer for a while now, and it’s been a game-changer for me. The control you get with HVLP is unmatched, especially for detailed work. I did notice that it requires a bit more patience with eco-paints due to their thicker consistency, but adjusting the air pressure helps a lot. For cleaning, I stick to a simple soap and water mix, which works wonders without any harsh chemicals.
1 Like
I tried using an airless sprayer with Earthborn Claypaint on a larger project, and while it was efficient, I did run into some clogging issues initially. Switching to a larger tip size made a huge difference. I’m curious, though, has anyone tried using a compressed air sprayer with eco-paints? I’m wondering how it compares in terms of overspray and control.
I’m all about reducing waste, so I gave the HVLP sprayer a shot with some eco-paint I had lying around. The reduction in overspray was noticeable, and I felt better about not wasting paint. Cleaning up was a breeze with vinegar and water. Does anyone have tips on how to store eco-paints properly to extend their shelf life?
I’ve experimented with both airless and HVLP sprayers on different projects. For me, the choice really depends on the project size and the level of detail required. I found that HVLP is perfect for smaller, more detailed work, while airless is better for covering large areas quickly. I’m interested in hearing if anyone has tried any other eco-friendly paint brands with these sprayers and how they compare to Earthborn Claypaint.
2 Likes
I recently switched to using eco-paints and have been using an HVLP sprayer exclusively. The learning curve was a bit steep at first, especially getting the consistency right, but it’s been worth it for the environmental benefits. I’ve been using a mix of vinegar and water for cleaning, which has been effective. Has anyone found a particular brand of eco-paint that works exceptionally well with sprayers, or is Earthborn Claypaint the go-to for most?
1 Like
I’ve actually used an HVLP sprayer with Earthborn Claypaint and it worked like a charm. The key is to thin the paint slightly, just enough to get it through the sprayer without losing the coverage. It did take a bit of trial and error to get the consistency right, but once I did, the finish was flawless. As for cleaning, I use a mix of vinegar and water. It’s eco-friendly and does the job without any harsh chemicals.
Airless sprayers can be a bit hit or miss with eco-paints from my experience. I tried it once and ended up with a clogged nozzle halfway through. It was a mess to clean up. I switched to a HVLP sprayer after that and haven’t looked back. They’re definitely more forgiving with thicker paints. For cleaning, I stick to soap and water. It’s simple, effective, and doesn’t require any special products.
2 Likes
I’m all for reducing waste and using eco-friendly products, but I’ve found that sometimes the old-fashioned way is best. I used a roller for my Earthborn Claypaint project and was really happy with the results. It might take a bit longer, but there’s no risk of clogging or overspray. Plus, cleaning up is a breeze with just soap and water. It’s worth considering if you’re not in a rush.