Hey fellow eco-warriors! 
I recently embarked on a mission to refresh my living room walls with Earthborn Claypaint in a lovely matte finish. The color is Clouded Sky, and it’s absolutely stunning! However, I’ve hit a snag. After applying a couple of layers, I noticed some areas needed touching up. But here’s the thing – blending these touch-ups seamlessly without disrupting the matte finish is proving to be a bit of a challenge.
I’ve previously used Auro Natural Paints for smaller projects and loved their eco-credentials, but this is my first time tackling a larger space with multiple layers. I’m curious, has anyone else faced this issue? What techniques or products have you found effective for ensuring a smooth, consistent finish across multiple layers of matte eco-paint? Specifically, I’m wondering about the best way to prep the surface and whether there’s a particular brush or roller that works best for touch-ups without leaving marks.
Also, if anyone has tips on maintaining the paint’s environmental integrity while achieving the desired aesthetic, I’m all ears! Let’s share our experiences and help each other out. What’s your go-to method for flawless eco-friendly paint touch-ups?
Hey @EcoPainterJane, I’ve been in a similar boat with Earthborn Claypaint! What I found works best for touch-ups is to lightly sand the area with fine-grit sandpaper before applying the paint. This helps the new layer blend seamlessly with the old. Also, using a high-quality, natural bristle brush can make a huge difference in avoiding brush marks. Hope this helps!
3 Likes
I’ve had great success with Auro Natural Paints for touch-ups. Their consistency is perfect for blending without leaving marks. For a matte finish, I recommend using a foam roller for the final layer. It gives a really smooth finish. Also, make sure to let each layer dry completely before applying the next one. Patience is key!
2 Likes
@GreenThumb88 Thanks for the tip! I’ll definitely try the fine-grit sandpaper trick. Do you have any specific brand recommendations for the natural bristle brush?
1 Like
I’ve been using Earthborn Claypaint for years and love it! For touch-ups, I agree with @GreenThumb88 about sanding first. Also, I’ve found that using a damp sponge to blend the edges of the touch-up area can help achieve a seamless finish. It’s a bit of extra work, but the results are worth it.
4 Likes
@SkyWatcher42 I’ll look into getting a foam roller. How do you ensure the paint doesn’t dry too quickly when using it? I’ve heard that can be an issue with foam rollers.
1 Like
Just chiming in to say that Earthborn Claypaint is amazing! For touch-ups, I’ve found that using a small, angled brush for precision and then going over it with a roller helps blend everything nicely. Also, keeping the room well-ventilated but not too breezy helps the paint dry evenly.
3 Likes
@NatureLover77 That’s a great tip about the damp sponge! I’ll have to try that next time. It’s always good to have multiple techniques in your toolkit.
2 Likes
@EcoPainterJane To prevent the paint from drying too quickly, I work in small sections and keep a spray bottle of water handy to lightly mist the roller if needed. It’s a bit of a balancing act, but it helps maintain the right consistency.
2 Likes
Hey, I totally get where you’re coming from with the Earthborn Claypaint. I’ve had my fair share of touch-up challenges too. What worked for me was using a damp sponge to blend the edges of the touch-up area. It’s a bit of a faff, but it really helps to avoid that patchy look. Also, make sure your paint is well mixed before you start. Sometimes, the pigments can settle, and that can mess with the consistency.
4 Likes
I’ve been using Earthborn Claypaint for a while now, and I’ve found that the key to seamless touch-ups is all in the prep. Like, really clean the area you’re going to paint. Dust and grime can mess up the finish. I use a microfiber cloth dampened with a bit of water. And yeah, a good quality brush is a must. I prefer synthetic ones for eco-paints, they seem to give a smoother finish.
Interesting point about the sanding. I’ve never tried that before. I usually just go over the touch-up area with a mini foam roller. It gives a really even coat and helps blend the edges. But I’ll definitely give sanding a go next time. Also, have you tried adding a bit of water to the paint? Just a splash can make it easier to work with and helps it blend better.
4 Likes
I’m all about that eco-friendly life, so I feel you on wanting to keep the environmental integrity intact. One thing I do is make sure I’m using all-natural cleaning products for prep. It might seem like overkill, but it keeps everything in line with the eco ethos. And for brushes, I’ve found that bamboo ones work really well with clay paints. They’re sustainable and give a great finish.
1 Like
I’ve had a similar experience with touch-ups looking a bit off. What I do is apply the paint in thin layers, letting each one dry completely before adding the next. It takes more time, but the finish is so much better. Also, I’ve noticed that the lighting in the room can make a big difference in how the touch-ups look. Maybe try adjusting your lighting to see if that helps blend the touch-ups better.
3 Likes
I’ve been using Earthborn Claypaint for a while now, and I totally get what you’re saying about the touch-ups. One thing that’s worked for me is using a damp sponge to lightly blend the edges of the touch-up area. It helps to feather out the paint and make it less noticeable. Just make sure the sponge isn’t too wet, or it can affect the matte finish.
I agree with the foam roller suggestion for the final layer. It really does make a difference. Another tip I’ve found useful is to always use the same type of brush or roller for touch-ups as you did for the initial coats. Consistency in tools can help maintain a uniform texture across the wall.
Patience is definitely key, as mentioned. But also, don’t forget about the importance of lighting when doing touch-ups. Natural light can reveal inconsistencies that artificial light might hide. So, try to do your touch-ups during the day or in a well-lit room to ensure you’re getting the best blend possible.
2 Likes
I’ve had a bit of a different experience. Instead of a foam roller, I prefer using a high-quality synthetic brush for touch-ups. It gives me more control and allows for a more precise application, especially in corners and edges. Plus, it’s easier to clean and reuse, which aligns with the eco-friendly aspect of using these paints.
1 Like
One thing that hasn’t been mentioned yet is the importance of the paint’s temperature. If the paint is too cold, it can affect the application and drying process, leading to a patchy finish. I always make sure my paint is at room temperature before starting any touch-ups. It’s a small detail, but it can make a big difference in the final look.
3 Likes
Totally get where you’re coming from with the touch-up struggles. I’ve found that using a mini foam roller for touch-ups helps a lot. It gives a more even finish compared to brushes, which can leave streaks. Just make sure to feather the edges outwards to blend it in with the existing paint. Also, letting the paint dry completely before adding another layer is key to avoiding any texture differences.