Hey everyone! So, I recently took the plunge and repainted my bathroom with EcoPure Natural Paint, hoping to keep things eco-friendly and mold-free. It’s been a couple of months, and I’m starting to notice some discoloration in the corners. I’m a bit worried it might be mold making a comeback. Has anyone else experienced this after switching to natural paints?
I chose EcoPure because of its zero-VOC formula and natural anti-mold properties, which seemed perfect for a damp environment like a bathroom. Before this, I tried GreenGuard’s Natural Finish, which worked well in my living room but didn’t hold up as well against moisture. I’m curious if the issue might be with the surface prep or if natural paints require a different approach to prevent mold.
What’s your experience with natural paints in high-moisture areas? Have you found any particular brands or techniques that help keep mold at bay? Also, how do you usually identify early signs of mold, and what steps do you take to address it without compromising on eco-friendliness? Looking forward to hearing your thoughts and tips!
Hey EcoPainterJane, I’ve had a similar experience with EcoPure Natural Paint in my kitchen. After a few months, I noticed some discoloration near the sink. I think it’s crucial to ensure the surface is thoroughly cleaned and dried before applying any natural paint. Mold loves moisture, so maybe a dehumidifier could help in your bathroom?
3 Likes
@GreenThumb88 Thanks for the tip! I did clean the walls before painting, but I didn’t think about using a dehumidifier. I’ll give that a try. Did you end up repainting your kitchen, or did you find another solution?
1 Like
I’ve been using BioShield Aqua Resin Stain in my bathroom for over a year now, and it’s been holding up great against mold. It’s a bit pricier, but the natural resins seem to create a more moisture-resistant barrier. Maybe worth considering if you’re looking for alternatives?
4 Likes
@NatureLover101 That’s interesting! I haven’t heard of BioShield Aqua Resin Stain before. How does it compare in terms of application and drying time to EcoPure?
2 Likes
I think the key with natural paints is ventilation. I use AFM Safecoat in my bathroom and make sure to keep the fan running during and after showers. It’s been a game-changer for preventing mold. Also, regular checks for any signs of moisture buildup can help catch mold early.
5 Likes
@DIYQueen Great advice! I do have a fan, but I might not be using it as effectively as I could. I’ll start running it more consistently. Thanks for the tip!
1 Like
Has anyone tried adding tea tree oil to their natural paint as an extra mold deterrent? I’ve read it has natural antifungal properties and was wondering if it could be mixed into paint for added protection.
2 Likes
@SunnyDays That’s a fascinating idea! I’ve used tea tree oil for cleaning, but never thought about adding it to paint. I wonder if it would affect the paint’s consistency or color. Definitely something to look into!
3 Likes
I’ve been using EcoPure Natural Paint in my bathroom too, and I noticed that ventilation is key. Even though the paint has anti-mold properties, without proper airflow, moisture can still cause issues. I installed a small exhaust fan, and it’s made a big difference. Maybe that could help in your situation?
Interesting point about the dehumidifier. I used EcoPure in my basement and had a similar issue. I found that applying a mold-resistant primer before the paint helped a lot. It’s an extra step, but worth it for the peace of mind. Also, keeping an eye on humidity levels with a hygrometer can give you a heads-up before mold becomes a problem.
1 Like
I switched to EcoPure for my bathroom renovation last year. Initially, I saw some discoloration, but after researching, I realized it was due to not letting the paint cure properly. Natural paints can take longer to cure, especially in humid environments. I gave it more time, kept the area well-ventilated, and the issue resolved itself. Patience and airflow seem to be crucial with these paints.
4 Likes
I’ve been using BioShield Aqua Resin Stain in my bathroom for over a year now, and it’s been holding up great against mold. It’s a bit pricier, but the natural resins seem to create a more moisture-resistant barrier. Maybe worth considering if you’re looking for alternatives?
3 Likes
Interesting to hear about BioShield Aqua Resin Stain. I’ve been using Earthborn Claypaint in my kitchen and bathroom, and while it’s great for the environment, I’ve noticed it doesn’t stand up to moisture as well as I’d hoped. Might have to give BioShield a try. How’s the color selection with it?
3 Likes
I’ve had a similar issue with EcoPure Natural Paint in my bathroom. After a few months, I started seeing those tell-tale signs of mold. I ended up going back to a more traditional paint with mold inhibitors, but I hate the idea of all those chemicals. Maybe I’ll look into BioShield Aqua Resin Stain as a compromise.
3 Likes
It’s tough finding the right balance between eco-friendly and functional, especially in high-moisture areas. I’ve been experimenting with different natural paints and found that proper ventilation and a good dehumidifier can make a big difference, regardless of the paint. Still, I’m curious about BioShield Aqua Resin Stain now. Anyone know if it’s easy to apply?
1 Like
I’ve actually tried mixing tea tree oil into my natural paint before, and it seemed to help a bit with mold prevention. The smell is pretty strong at first, but it fades after a while. Just make sure you mix it well, or you might end up with spots that are more potent than others. It’s not a miracle cure, but every little bit helps, right?
2 Likes
Adding tea tree oil sounds like a good idea, but I’d be careful with the ratios. Too much oil might affect the paint’s consistency and how it adheres to the wall. Maybe test it on a small area first? Also, I’ve heard that improving ventilation can make a big difference in preventing mold, regardless of the paint type. Have you considered adding an exhaust fan if you don’t already have one?
5 Likes
I haven’t tried tea tree oil in paint, but I do use it in a spray bottle with water to clean areas prone to mold. It works pretty well for maintenance. As for natural paints, I’ve had better luck with brands that specifically mention mold resistance on the label. It might be worth looking into a different brand if EcoPure isn’t holding up as expected. Sometimes, it’s all about finding the right product for your specific environment.
5 Likes