Hey fellow green DIYers! 
I recently took the plunge and painted my living room with EcoPure Natural Paint, hoping to embrace a more sustainable lifestyle. The color turned out beautifully, but after a few weeks, I noticed some areas starting to peel. It’s been a bit disheartening, especially since I was so excited about using a product that’s better for the planet.
I’ve used BioShield Clay Paint in the past with great success, so this peeling issue is new territory for me. I followed all the prep steps—cleaning the walls, sanding, and applying a primer. The walls are plaster, which I thought would be compatible. Has anyone else experienced peeling with natural paints on plaster surfaces? Could it be an issue with the paint’s adhesion or perhaps something in my application technique?
I’m really curious to hear if others have faced similar challenges and how you’ve overcome them. Did switching brands help, or was there a specific fix that worked for you? Also, any tips on ensuring better adhesion for future projects would be greatly appreciated. Let’s share our experiences and help each other make our homes more eco-friendly without compromising on quality!
Looking forward to your insights and suggestions!
Hey @EcoPainterJane, sorry to hear about the peeling issue. I’ve used EcoPure Natural Paint before and had a similar problem. After some research, I found that the key is in the preparation. Even though you mentioned you cleaned and sanded the walls, plaster can be tricky. It might need a specific type of primer that’s compatible with both the plaster and the natural paint. Have you considered using a plaster sealer before applying the primer? It made a huge difference for me.
3 Likes
I’ve had great success with BioShield Clay Paint as well, but when I tried EcoPure, I noticed it didn’t adhere as well to certain surfaces. I think it might be the formulation. Have you reached out to EcoPure’s customer service? They might have some specific advice or even a different product recommendation for plaster walls.
2 Likes
@GreenThumb88 That’s a great tip about the plaster sealer! I didn’t think of that. Do you have any brand recommendations for a sealer that works well with natural paints? I’m definitely willing to give it another go with better preparation.
1 Like
I’ve been using Earthborn Claypaint for a while now and haven’t had any peeling issues, even on plaster walls. Maybe it’s worth considering a switch if EcoPure continues to give you trouble. Earthborn has a great range of colors and their customer service is super helpful if you have any questions about compatibility.
4 Likes
@DIYQueen I haven’t reached out to them yet, but that’s a good idea. I’ll send them an email today. Thanks for the suggestion!
1 Like
@EcoPainterJane I used EcoSeal Plaster Sealer and it worked wonders. It’s specifically designed for natural paints and helps with adhesion on tricky surfaces like plaster. Just make sure to let it dry completely before applying your primer and paint. Good luck!
2 Likes
I’m all for eco-friendly solutions, but sometimes it feels like we’re the beta testers for these products. 
That said, I’ve had peeling issues with a couple of brands, not just EcoPure. It seems like the key is really in the prep work, as others have mentioned. Maybe we need a sticky thread or a guide on best practices for using natural paints on different surfaces?
3 Likes
@SustainaBill That’s a great idea! A guide would be super helpful, especially for those of us just starting out with natural paints. I’d be happy to contribute once I get this peeling issue sorted out.
2 Likes
Hey @EcoPainterJane, I had a similar issue with EcoPure Natural Paint on my plaster walls. It turned out the problem was the humidity level in the room. Natural paints can be more sensitive to moisture. I started using a dehumidifier to keep the air dry, especially during the first few weeks after painting. It really helped the paint to set properly. Maybe give that a try?
3 Likes
I’ve been using natural paints for years, and I’ve found that the key is in the application technique. With EcoPure, it’s crucial to apply thin coats and let each one dry completely before adding the next. Rushing the process can lead to peeling. Also, make sure you’re using a natural bristle brush or roller. Synthetic materials can sometimes react poorly with natural paint formulas. Just my two cents!
3 Likes
I had a similar issue with EcoPure Natural Paint on my plaster walls. After some research, I found out that the problem was the moisture level in the walls. Plaster can be tricky because it absorbs moisture differently than drywall. I ended up using a dehumidifier for a few days before repainting, and this time I mixed a bit of plaster conditioner into the paint. It worked like a charm. Maybe give that a try?
4 Likes
Interesting point about the moisture. I’ve been using EcoPure for a while now and haven’t faced peeling issues, but my walls are drywall. I wonder if EcoPure has a different formulation for different surfaces. Have you considered using a different primer specifically designed for plaster walls before applying the natural paint? Sometimes, the issue isn’t with the paint but with how well the primer adheres to the surface.
Totally get where you’re coming from with the beta tester vibe. It’s frustrating when you’re trying to do the right thing for the planet and hit these snags. I’ve had mixed results with natural paints too. One thing that’s worked for me is using a stronger primer specifically designed for problematic surfaces. Maybe give that a shot before your next paint job?
3 Likes
I hear you on the prep work being crucial. I’ve found that sometimes, even with all the right steps, certain paints just don’t play nice with specific surfaces. Have you considered reaching out to EcoPure’s customer service? They might have some insights or even a different product recommendation for plaster walls. It’s worth a shot before switching brands entirely.
3 Likes